PCF8574AP I2C I/O Bus Expander IC DIP16

Product Code: IC PCF8574AP Bus Expander BIN 653 (B)
Availability: 99

Price: R20.00
Ex Vat: R17.39

Qty: - OR - Add to Wish List
Add to Compare

0 reviews | Write a review

Description Reviews (0)

PCF8574AP I2C I/O Bus Expander IC DIP16 features:

Operating supply voltage 2.5 to 6 V
Low standby current consumption of 10μA maximum
I2C to parallel port expander
Open-drain interrupt output
8-bit remote I/O port for the I2C-bus
Compatible with most microcontrollers
Latched outputs with high current drive capability for directly driving LEDs
Address by 3 hardware address pins for use of up to 8 devices (up to 16 with PCF8574A)

The devices consist of eight quasi-bidirectional ports, 100 kHz I2C-bus interface, three hardware address inputs and interrupt output operating between 2.5 V and 6 V. The quasi-bidirectional port can be independently assigned as an input to monitor interrupt status or keypads, or as an output to activate indicator devices such as LEDs. System master can read from the input port or write to the output port through a single register. The low current consumption of 2.5 µA (typical, static) is great for mobile applications and the latched output ports directly drive LEDs. The PCF8574 and PCF8574A are identical, except for the different fixed portion of the slave address. The three hardware address pins allow eight of each device to be on the same I2C-bus, so there can be up to 16 of these I/O expanders PCF8574/74A together on the same I 2C-bus, supporting up to 128 I/Os (for example, 128 LEDs). The active LOW open-drain interrupt output (INT) can be connected to the interrupt logic of the microcontroller and is activated when any input state differs from its corresponding input port register state. It is used to indicate to the microcontroller that an input state has changed and the device needs to be interrogated without the microcontroller continuously polling the input register via the I2C-bus. The internal Power-On Reset (POR) initializes the I/Os as inputs with a weak internal pull-up 100 µA current source.